Zebra Bluetooth Scanners for WithoutWire Mobile

Connecting Zebra Bluetooth Scanners for WithoutWire Mobile

WithoutWire Mobile supports several handheld Bluetooth scanners, including Zebra devices. Below, you will find more information about the currently compatible devices and the steps to establish connections based on your mobile platform.

NOTE: Some brands may require scanning barcodes as part of the setup process. In certain cases, specific parameters need to be generated for your mobile device. It's important to note that if your host device has a highly reflective screen, it may cause issues during the setup phase. Please take this into consideration when determining the manufacturer and connection method that best suits your needs.

If you have any questions regarding compatibility, feel free to reach out to the WithoutWire support team. For device-specific issues, please refer to the scanner manufacturer's support or troubleshooting resources.

Zebra

Zebra devices provide a rugged experience and offer expanded scanning capabilities. With their 123Scan software, some of their scanners can be programmed to customize scanning for multiple barcodes, providing greater flexibility.

Current Compatible Devices

CS6080, DS2278-HC, DS2278-SR, DS3678-DPA, DS3678-DPX, DS8178-HC, DS8178-SR, LI3678-ER, LI3678-SR, RFD8500 RFID Reader, RS5100, Symbol CS4070 Companion Scanner

Android Steps

To pair a Zebra Bluetooth-compatible scanner with the WithoutWire app, follow these steps:

NOTE: Make sure the SSI BT Classic mode is enabled as it is required for the connection to work properly. It can be found in the device manuals as well as posted just below.

NOTE: If your device is not shown in the list or fails to connect, check your Bluetooth settings.

(Screen captures from a Samsung A23 running Android 13)

Step 1: Go to the Settings menu on your device.

Step 2: Locate the Bluetooth menu in the Settings.

Step 3: Pair your Honeywell Bluetooth compatible scanner with your device in the Bluetooth menu. Once the pairing is successful, proceed to the next step.

Step 4: Once the device is paired, return to the WithoutWire app.

Step 5: From the main screen, select the hamburger menu in the top left of the screen.

Step 6: Select Scanners from the slide out menu.

Step 7: Select the Zebra tab if it is not already. 

Step 8: Scroll to the list of devices and locate your paired device.

Step 9: Tap on your device in the list under AVAILABLE DEVICES below. The connection process should start.

The scanner should now be connected to the WithoutWire app.

iOS Steps

To pair a Zebra Bluetooth-compatible scanner with the WithoutWire app, follow these steps:

(Screen captures from an iPhone 13 Max Pro)

Step 1: Open the WithoutWire app.

Step 2: From the main screen, select the hamburger menu in the top left of the screen.

Step 3: Select Scanners from the slide out menu.

Step 4: Select the Zebra tab if it is not open already. 

Step 5: Scroll down and tap "TAP FOR CONNECTION BARCODES" below the steps section in the app.

Step 6: Scan the barcode that appears on the screen. 

NOTE: The barcode in the image below is a sample and not intended for the connection process.

Step 7: Once connected, the barcode should disappear from the screen, and you should see a prompt indicating that the device is connected.

Step 8: The name of the scanner will appear in the connected scanner section above.

You can now leave this screen and start scanning in the WithoutWire app.